• Two signal routing jumper blocks
• Small size (2.06" x 1.44")
• Ships with a 6" 6-pin cable and a 6-pin header

The Digilent PmodCON2 Module Board makes it easy to connect a Digilent system board to outside devices with BNC plugs. It is ideal for testing a Digilent system board with equipment that uses BNC connections.

The CON2 conveys signals between a 6-pin header and two BNC jacks. It uses jumpers to specify which of the 6-pin connector pins correspond to each BNC jack.

The CON2 has a 6-pin header for easy connection to a Digilent system board. For example, some system boards like the Digilent Pegasus board have a 6-pin header that can connect to the CON2 with a 6-pin cable. To connect the CON2 to other Digilent system boards, a Digilent Modular Interface Board (MIB) and a 6-pin cable are needed. The MIB plugs into the system board, and the cable connects the MIB to the CON2.