|
PmodNIC - Network Interface Controller
- 10 Mb/s IEEE 802.3 compatible Ethernet controller
- SPI interface
- 10BASE-T MAC/PHY
- Small size (1.65" x 0.80")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodRF1 - Wireless Radio Transciever
- Operates in selected frequency ranges within the North American ISM band, the European SRD band, and the Chinese WPAN band
- Features a standard SMA connector for use with a wide range of antennas (2" antenna included)
- Small size (1.5" x 0.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodSD - SD card slot
- Provides an SD card interface for use with Digilent system & microcontroller boards
- Small size (1.75" x 1.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodCLP - Character LCD w/ parallel interface
- 16x2 character display
- Parallel data interface
- Simple terminal like display interface
- Measures 3.3" x 2.3"
- Ships with a 6" 6-pin cable, a 6" 2x6-pin to dual 6-pin cable, and appropriate headers
PmodCLS - Character LCD w/ serial interface
- 16x2 Character Display
- Flexible communications using UART, SPI or TWI interface
- Simple terminal-like display interface
- Measures 3.75" x 1.75"
- Ships with a 6" 6-pin cable and a 6-pin header
PmodJSTK - Two axis joystick
- Two Axis Resistive Joystick (CTS 252A103B60NB)
- Joystick also functions as a push button
- Two additional user buttons
- Ships with a 6" 6-pin cable and a 6-pin header
PmodENC - Rotary encoder
- Rotary push-button shaft encoder
- Slide switch with a series resistor
- Small size (1.5" x 0.75")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodSSD - Seven-segment display
- Two-digit high bright seven-segment display
- Small size (0.80" x 0.80")
- Ships with TWO 6" 6-pin cables and TWO 6-pin headers
PmodAMP1 - Speaker / headphone amplifier
- 6-pin header for inputs
- 3V-5V operating voltage
- Small size (0.80" x 1.15")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodBTN - Push buttons
- Four debounced momentary pushbutton switches
- Small size (1.20" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodSWITCH - Slide switches
- Four slide switches
- Small size (1.30" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
Pmod8LD
- Eight logic level inputs
- Eight high bright green LEDs
- Small size (0.80" x 1.10")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodLED - High bright LEDs
- Four logic level inputs
- Four high bright red LEDs
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodRS232 - Serial converter & interface
- Transmit and receive data functions
- Small size (1.00" x 1.30")
- Optional RTS and CTS handshaking functions (Rev.B)
- Ships with a 6" 6-pin cable and a 6-pin header
PmodDIN1 - Digital Inputs
- Four digital-input channels
- Input protection diodes
- Four debounce filters
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodTPH - 6-pin test point header
- 6-pin test point header
- Small size (1.00" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodTPH2 - 12-pin test point header
- Test points for use with the Digilent 12-pin (2x6) PMod connection protocol
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodLS1 - Infrared Light Detector
- Four 4-pin headers for interface with reflective or transmissive photo detectors
- On-board sensitivity adjustment
- Four on-board LEDs for monitoring input status
- Works with our IR Reflective Object Sensor Cable Assembly (IRROSC)
- Ships with a 6" 6-pin cable and a 6-pin header
PmodHB3 - H-bridge w/ feedback inputs
- 2A H-bridge circuit for voltages up to 12V
- Two 2-pin screw terminal blocks for connection to motor
- Two feedback channels w/ Schmitt-trigger inputs
- Small size (0.8" x 1.20")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodHB5 - H-bridge w/ feedback inputs
- 2A H-bridge circuit capable of handling up to 12V
- Single 6-pin JST connector
- Two feedback channels w/ Schmitt-trigger inputs
- Small size (0.8" X 1.3")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodOD1 - Open drain output
- 4.1A peak output current (t < 5s)
- 3.0A continuous current (at 25°C), 2.2A continuous current (at 85°C)
- One 6-pin header for input
- Two screw terminal blocks for outputs
- Ships with a 6" 6-pin cable and a 6-pin header
PmodOC1 - Open collector output
- Four output clamp diodes
- 40V maximum voltage
- Small size (0.75" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodTMP - Thermometer/thermostat
- Maxim DS1626 high precision three wire thermometer/thermostat
- 6-pin header and 6-pin socket
- Requires no external components
- Temperature range from -55C to +125C
- Ships with a 6" 6-pin cable and a 6-pin header
PmodMIC - Microphone w/ digital interface
- Inclues preamp, compressor, and A/D converter
- 3V-5V operating voltage
- Small size (0.80" x 1.1").
- Ships with a 6" 6-pin cable and a 6-pin header
PmodR2R - Resistor Ladder D/A Converter
- 8-bit digital to analog conversion at up to 25MHz
- Easy attachment of oscilloscopes to illustrate the data conversion process
- Small size (1.0" x 0.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
Pmod-DA1 - Four 8-bit D/A outputs
- Four D/A conversion channels
- Very low power consumption
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
Pmod-DA2 - Two 12-bit D/A outputs
- Two National Semiconductor DAC121S101, 12-bit D/A converters
- Very low power consumption
- Two simultaneous D/A conversion channels
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodAD1 - Two 12-bit A/D inputs
- Two 2-pole Sallen-Key anti-alias filters
- Two simultaneous A/D conversion channels at up to one MSa per channel
- Very low power consumption
- Small size (0.95" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodRJ45 - RJ45 connector (pair)
- Extends the 6-pin connection used by Pmods over greater distances via RJ-45 cable
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON4 - RCA audio jacks
- Flexible configuration of header pins and RCA jacks
- Small size (0.80" x 1.10")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON3 - R/C servo connectors
- Screw terminal connector for R/C servo power supply
- Small size (.80" x 1.00")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON2 - BNC connectors
- Two signal routing jumper blocks
- Small size (2.06" x 1.44")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON1 - Wire terminal connectors
- Small size (1.10" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodPS2 - Keyboard/mouse connector
- Power routing jumpers
- Small size (0.80" x 1.00")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodBB - Wire wrap / bread board
- 266 tie point wire wrap area
- Ships with a 170 tie point bread board
- All signals pass through
- Small size (1.5" x 3.5")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodSF - Serial Flash ROM, 16 or 128 Mbit
- Available with either a 16 or 128Mbit Serial Flash
- Very low power consumption
- Data retention greater than 20 years
- Greater than 100,000 erase/program cycles per sector
- Ships with a 6" 6-pin cable and a 6-pin header
PmodREG1 - Voltage regulator
- 250mA, low dropout linear regulator
- Fixed 3.3V output voltage
- Input voltage range of 3.8V-16V
- Small size (0.80" x 1.20")
- Ships with a 6" 6-pin cable and a 6-pin header
Xilinx CoolRunner-II Pmod Bundle
|
